北方农业学报 ›› 2020, Vol. 48 ›› Issue (6): 50-55.doi: 10.12190/j.issn.2096-1197.2020.06.08

• 土壤肥料·节水灌溉 • 上一篇    下一篇

增施硼肥对大豆农艺性状及产量的影响

李强1, 苏二虎1, 陈广平2, 赵晓宇1, 贾利敏1, 冯小慧1, 王雪娇1   

  1. 1.内蒙古自治区农牧业科学院,内蒙古 呼和浩特 010031;
    2.莫力达瓦达斡尔族自治旗农业技术推广中心,内蒙古 尼尔基镇 162850
  • 收稿日期:2020-11-09 出版日期:2020-12-20 发布日期:2021-02-04
  • 通讯作者: 王雪娇(1983—),女,助理研究员,硕士,主要从事大豆育种、栽培研究及项目管理的工作。
  • 作者简介:李强(1982—),男,副研究员,博士,主要从事大豆育种与栽培的研究工作。
  • 基金资助:
    内蒙古自治区自然科学基金项目(2019MS03006,2020MS03094);内蒙古自治区应用技术研究与开发资金项目(2019GG338);内蒙古自治区人才开发基金项目;内蒙古自治区“草原英才”创新团队项目

Effects of increasing boron fertilizer on agronomic characters and yield in soybean

LI Qiang1, SU Erhu1, CHEN Guangping2, ZHAO Xiaoyu1, JIA Limin1, FENG Xiaohui1, WANG Xuejiao1   

  1. 1. Inner Mongolia Academy of Agricultural and Animal Husbandry Sciences,Hohhot 010031,China;
    2. Morin Dawa Daur Autonomous Banner Agricultural Technology Extension Center,Nierji Town 162850,China
  • Received:2020-11-09 Online:2020-12-20 Published:2021-02-04

摘要: 【目的】 明确内蒙古大兴安岭南麓地区大豆增施硼肥的最佳生育时期,为该地区大豆水肥管理提供技术支持和理论依据。【方法】 以蒙科豆9号为试验品种,通过在开花期(BR1)、结荚期(BR3)、鼓粒期(BR5)、开花期+鼓粒期(BR1R3)4种生育时期增施硼肥,与传统耕作(CK)的农艺性状与产量等指标相比,并进行投入产出核算,计算经济效益。【结果】 不同处理增施硼肥对大豆生育日数、主茎节数影响不显著(P>0.05),BR1R3处理株高显著高于CK(P<0.05),BR1、BR3、BR1R3处理有效分枝数均显著高于CK(P<0.05)。各处理间大豆干物质积累量与SPAD值表现为BR1R3>BR1>BR3>BR5>CK,BR1R3处理干物质积累量和SPAD值增加最显著(P<0.05),较CK增加12.5%和7.2%。各处理间蛋白质含量、脂肪含量、蛋脂总量差异均不显著(P>0.05)。大豆不同生育期增施硼肥对产量的影响规律为:BR1R3> BR1>BR3>BR5>CK,BR1R3、BR1、BR3处理的产量与CK相比均差异显著(P<0.05),分别增加了497、329、234 kg/hm2,BR1R3处理单株荚数、单株粒数、单株粒重均较CK增加最显著(P<0.05)。不同处理间收入情况BR1R3、BR1、BR3较CK增效分别为15.5%、12.1%、7.0%,增收1 386.0、1 078.5、622.5元/hm2。【结论】 内蒙古大兴安岭南麓地区大豆种植增施硼肥的最佳时期是开花期和结荚期,两个时期同时增施增产效果最显著,增收增效效果最佳,鼓粒期增施硼肥效果不显著。

关键词: 大豆, 农艺性状, 品质, 产量, 经济效益

Abstract: 【Objective】To determine soybean optimal growing period under the condition of increasing boron fertilizer in the southern Daxing′Anling of Inner Mongolia,and to provide technical support and theoretical basis for water and fertilizer management of soybean in this area.【Methods】Using Mengkedou No.9 as the experimental variety,the agronomic characters and yield under traditional cultivation were set as the control,increasing boron fertilizer at flowering stage(BR1),pod setting stage(BR3),seed filling stage(BR5)and flowering+seed filling stage(BR1R3),the input-output accounting was carried out,and the economic benefits were calculated.【Results】There was no significant difference in the number of growth days and main stem nodes between different treatments(P>0.05).The plant height of BR1R3 treatment was significantly higher than that of CK(P<0.05).The number of effective branches in BR1,BR3 and BR1R3 was significantly higher than that of CK(P<0.05).The results of dry matter accumulation and SPAD value of soybean under the different treatments were BR1R3>BR1>BR3>BR5>CK. The dry matter accumulation and SPAD value in BR1R3 increased most significantly(P<0.05),12.5% and 7.2% when compared with CK. There were no significant differences in protein content,fat content and total egg fat content among the treatments(P>0.05). Under the condition of increasing boron fertilizer,the yield of soybean at different growth stages was BR1R3>BR1>BR3>BR5>CK,and BR1R3,BR1 and BR3 were significantly different from CK(P<0.05),the yield increased 497,329 and 234 kg/hm2 respectively.The pod number per plant,grain number per plant and grain weight per plant of BR1R3 treatment were significantly higher than CK(P<0.05). Compared with CK,the efficiency of BR1R3,BR1 and BR3 was 15.5%,12.1% and 7.0% respectively,and the income increased by 1 386.0,1 078.5 and 622.5 yuan/hm2.【Conclusion】The flowering stage and pod setting stage were optimal time for boron fertilizer applying in soybean in the area for income increasing. Increasing the boron fertilizer input simultaneously at flowering stage and pod setting stage had a most significant effect in yield enhancement and a best performance in elevating economic income and efficiency, while no significant effect was observed at filling stage.

Key words: Soybean, Agronomic characters, Quality, Yield, Economic benefit

中图分类号: 

  • S565.1